360K Floppy Drive (250-1005A)        Settings          Faxback Doc. # 5350

SUPPORTED ON:  1000ex/1000sx/1000sl/1000tl

NOTES & JUMPERS:
IU     Selects active in use signal
DSx    Drive Select, x = 0-3
Termination (RA1) will be on all drives and should not be removed.

TERMINATION:
  Termination (RA1) will be on all drives and should not be removed.  It is
  a 1K ohm 9 resistor array soldered on the PCB.

DIAGNOSTICS:
These are available through National Parts -
  AXX-2047  Tandy 1000 Diagnostic Disk
            TDC - select TEAC drive type
            DISKDG - configure drive for 40 cylinders and 2 heads
  AXX-2046  Double-sided, 40-track Alignment Disk

SYSTEM CONFIGURATIONS:
  Drive will only be found in the Tandy 1000.

(css 07/30/93)