CDR-1500  (250-1081)            Installation           Faxback Doc. # 5376

What you need:

To install the CD-ROM Extensions for your CD-ROM drive, you need MS-DOS 3.1
or later and the MS-DOS CD-ROM Extensions Diskette which contains the 
following files:

SETUP.EXE
MSCDEX.EXE
HITACHIA.SYS
HITACHIB.SYS
CDMGR.EXE
CDMENU.EXE
CDPLAY.EXE
README.DOC

To run SETUP:

1.  Turn on your computer and start up DOS.
2.  Insert the MS-DOS CD-ROM Extensions disk into drive A:.
3.  Type A: and press <ENTER>.
4.  At the DOS prompt, type SETUP and press <ENTER>.
5.  Follow the instructions that appear on your screen.
    Example:
    ************************************
    *****   MSCDEX SETUP PROGRAM   *****
    ************************************

    The following CD-ROM device drivers were found:
            HITACHIA.SYS
            HITACHIB.SYS

    HITACHIA.SYS   For IBM PC/XT/AT, Personal System/2 model 25/30
    HITACHIB.SYS   For IBM Personal System/2 model 50/55/60/70/80

    Select the proper device driver for your system.

    Do you want to install HITACHIA.SYS? [Y or N] Y

    How many drives would you like to Support? (1-> 8)
    (To use more than 4 drives, an 8-drive-daisy-chain type interface card
    and drives are required)
            (Press ENTER for default)
            N:1             (default)
            N:<ENTER>

    If you would set I/O address, please input address
    <address values> 200, 220, 240, 260, 300, 320, 340, 360
            (Press ENTER for default)
            P:300           (default)
            P:<ENTER>

    The CD-ROM Extensions Program was found:
            MSCDEX.EXE

    If you are installing onto a bootable floppy disk, use your normal boot
    disk and specify drive b: as the drive to copy files onto.

    Which directory would you like the CD-ROM device driver file installed
    in?
            (Press ENTER for default)
            C:\DEV          (default)
            C:\(ENTER)

    Installing file HITACHIA.SYS
    Copying file HITACHIA.SYS to C:\DEV\HITACHIA.SYS...  ...Done

    Which directory would you like MSCDEX.EXE installed in?
            (Press ENTER for default)
            C:\BIN          (default)
            C:<ENTER>

    Installing file MSCDEX.EXE
    Copying file MSCDEX.EXE to C:\BIN\MSCDEX.EXE...  ...Done

    The setup program has copied MSCDEX and the CD-ROM device driver to your
    bootable disk.  If you continue, the SETUP program will modify your
    CONFIG.SYS and AUTOEXEC.BAT files to install the device drivers and
    invoke MSCDEX when booting.

    Would your like to continue the setup procedures? [Y or N] Y

    **********************************
    *****  UPDATING CONFIG.SYS   *****
    **********************************

    Moving C:\CONFIG.SYS to C:\CONFIG.BAK
    Copying contents of C:\CONFIG.BAK to C:\CONFIG.SYS
    Adding the following entry to C:\CONFIG.SYS
           DEVICE=\DEV\HITACHIA.SYS /D:MSCD000 /N:1 /P:300
    Done...

    Press [ENTER] when ready to proceed. <ENTER>

    *************************************
    *****   UPDATING AUTOEXEC.BAT   *****
    *************************************

    Moving C:\AUTOEXEC.BAT to C:\AUTOEXEC.BAK
    Copying contents of C:\AUTOEXEC.BAK to C:\AUTOEXEC.BAT
    Adding the following entry to C:\AUTOEXEC.BAT
           \BIN\MSCDEX.EXE /D:MSCD000 /M:8
    Done...

    *******************************
    *****   SETUP COMPLETED   *****
    *******************************

    Now reboot your computer and the device driver and MSCDEX will install
    themselves in DOS and you'll be ready to go.

Do Not Place Unit in Following Situations:

    High temperature locations.
    High humidity locations.
    Dusty locations.
    Locations subject to excessive vibration.
    Locations subject to extreme changes of temperature and humidity.
    Inclined location.
    Locations where there is a high level of dust and/or suspended matter.
    (To avoid any trouble occurring due to dust, the air fan used with the
    equipment to be installed must be of the air suction type with an air
    filter.

Do Not Operate Unit in Following Ways:

    Place heavy loads on the unit.

WARNING:

A strong magnetic field is present at the bottom of the CD-ROM drive.
Therefore, to avoid erasures, please:

    -- Do not place floppy diskettes under or near the bottom of the drive,
       and
    -- Do not mount the drive on top of the hard disk drive.