Faxmate  (250-3063)            Settings                Faxback Doc. # 5388

To install this board observe the standard anti-static precautions. Verify
that the factory default settings˙will not interfere with installed boards.
Change˙ settings if necessary. Plug board in to computer slot. The Tandy
Faxmate is factory set for I/O address˙2E0-2E7. The following table lists
other possible˙settings for the Faxmate board.


Switch:        1         2         3          Faxmate I/O Add.

               Up        Up        Up             220-227
               Up        Up        Dn             260-267
               Up        Dn        Up             2A0-2A7
               Up        Dn        Dn             2E0-2E7 *
               Dn        Up        Up             320-327
               Dn        Up        Dn             360-367
               Dn        Dn        Up             3A0-3A7
               Dn        Dn        Dn             3E0-3E7

* Factory Default Setting.

Note: If they are present Switches 4 and 5 must be set˙to the Down or OFF
position.

(css 08/02/93)
~