3-COM Etherlink II Board  (260-5501)     Features      Faxback Doc. # 5395

The Diagnostic program (3C503.EXE) when run on the Tandy 1000 alone, the "-I"
option must be selected.  (NOT required for station-station test)

Example:  3C503 L -I <ENTER>

Executes diagnostics in loopback mode (while 2 terminators are attached to
the T-connector on the board)

MS-DOS Ver. 03.20.02, 250-4103 (Tandy 3000), 250-4070 (Tandy 3000HL) Includes
a new version of ANSI.SYS which must be used in CONFIG.SYS before running
3Com's menu-driven server setup.

The EtherLink (260-5501) can be installed in Tandy 3000, 3000 HL, 1200, 1000.

(CSS/jlc-03/28/94)