TOKEN RING Adapter   (260-5540)    Install              Faxback Doc. # 5470

Verify jumper settings and make any necessary modifications.  Place 
the adapter in any expansion slot.  If you are installing two 
adapters, change the jumper at J2 on one of them to make it the
secondary adapter.  Each one needs a different IRQ setting at J4.

CHECKING THE ADAPTER INSTALLATION

Connect the adapter to a MAU port and use the Diagnostic Program on
the TokenDisk Diskette to verify the adapter and cable are installed
correctly.  The program is located in the \DIAG directory of the
diskette.  If you changed the IRQ from the factory setting, you must
specify the new IRQ channel in the configuration menu.

(dkh-08/03/93)