Dual Serial/Parallel (250-4025) Installation Faxback Doc. # 5575 Port Adapter The adapter can be installed in any 8- or 16-bit expansion slot. If you will be using the parallel port on the adapter, reserve a nearby slot for the parallel port cable. Install the adapter as you would any expansion adapter. Refer to your computer user's guide if you need additional instructions. Connect the parallel port cable to the adapter. The cable is keyed so that it connects only one way. Remove the slot cover from the selected expansion slot. Use the screw from the slot cover to secure the cable's metal bracke in the back panel. After you install the dual serial/parallel adapter and any other options you are adding at this time, replace the computer cover. Secure the cover with the screws you removed previously. Reconnect all peripheral cables to the appropriate connectors on the back of the computer, and reconnect the power cord. Run the Setup utility to include the adapter and any other new options in the system configuration. Refer to your computer user's guide for specific information about the Setup utility. (smm 08/03/93)