CGP-115  (260-1192)              Paper Loading         Faxback Doc. # 5636

Be sure to use Radio Shack Color Graphic Printer paper (26-1428) with the
Printer. When loading paper into the Printer, follow these steps:

1. With scissors, cut the end of the paper square.
2. Insert the end of the paper into the slot in the bottom of the Printer.
3. Insert the shaft into the roll and place the roll of paper into the 
   paper compartment.
4. Turn power on.
5. Raise the Top Cover so printing will not take place on the Platen.
6. Press the PAPER FEED button to get the paper through the slot and 
   around the Platen.

PAPER SEPARATOR
Always be sure the Paper Separator is in place when you are using the
Printer. The Separator keeps the "outgoing" paper from re-entering the
Printer. If out-going paper does re-enter the Printer, a paper jam 
condition will occur which could damage the Printer. To install the 
Separator:

1. Gently squeeze the two ends of the Separator together.
2. Insert the ends of the Separator into the Separator slot.
3. Release the two ends of separator. Be sure the Separator is properly
   seated.

(dtc-08/04/93)