DMP 205  (260-2904)       Using The Cut Function      Faxback Doc. # 5726

Use CUT to properly align the perforation in fanfold paper to the tear-off
position so you can tear off the paper more easily  This function works
best when you properly set the print position 


1.  Press ON/OFF LINE until the ON/OFF LINE indicator lights.

2.  Press CUT to advance the fanfold paper perforation to the tear-off
    position.

3.  Flip up the paper rack cover and tear off the fanfold paper.

4.  Press CUT to retract the paper to the original position.

NOTES:

-The paper automatically retracts in one minute even if you do not
 press CUT.

-You can advance the paper using LF/FF when the paper is at the
 tear-off position.

-CUT works only when the printer is not receiving data from the computer.

-If the printer receives data while the paper is at the tear-off position,
 the printer automatically retracts the paper and starts printing.

(smc-12/07/93)