DMP 206  (260-2906)     Ribbon Installation            Faxback Doc. # 5866

*Caution:  Printing without a ribbon damages the print head and the
           platen.

1)  Make sure the printer is turned off.

2)  Turn the ribbon feed knob in the direction of the arrow to remove
    slack of the ribbon.

3)  Insert the ribbon in between the ribbon mask and the print head, and
    position the cartridge so the ribbon feed shaft is inserted into the
    hole under the ribbon feed knob.

4)  Press down on both sides of the cartridge.

5)  Twist the ribbon feed knob of the cartridge to tighten the ribbon.
    Make sure the ribbon is properly positioned in front of the print head.

*NOTE:  The life expectancy for the sample black ribbon cartridge supplied
        with the printer is shorter than the estimated life expectancy of a
        replacement ribbon.

(smc/jej-05/12/94)