BPS-250  (260-0250)         Troubleshooting            Faxback Doc. # 5871

If there appears to be a problem with the BPS-250:

1.  Be sure the power line cord is firmly plugged  into a live outlet.

2.  Be sure the Output Power Switch is in the ON position.

If these conditions are met but there still appears to be a problem, do the
following:

1.  Disconnect the BPS-250 input power line cord, and place the OUTPUT
Power switch in the OFF position.

2.  Unscrew and remove the AC line fuse.  Visually check that it is intact.
If it is blown, remove the fuse from the cap and insert another 4 amps
slow blow fuse.  Screw the fuse back into the unit.

If these conditions are met but there still appears to be a problem,
contact your locate Radio Shack Service Center.

(jlc-10/11/93)
R