Fax Modem (250-3581) Specifications Faxback Doc. # 5888 OPERATION MODES: CCITT V.22bis, V.22, V.23 and V.21 Bell 212A and 103 CCITT V.29, V.27ter, and V.21 channel 2 True FAX send and receive facsimile to 9600 bps Error correction (V.42 LAPM and MNP 2, 3 ,4, 10) Data Compression (V.42. bis and MNP 5) Communication software compatible command sets Enhanced "AT" command set. FAX class 1 commands FAX class 2 commands (proposed EIA/TIA 592). Line quality receive level monitoring. Programmable speaker volume control. NVRAM directory stored profiles. Flow control (XON/OFF, RTS/CTS). Automatic format/speed sensing from 300 bps to 19,200 bps. OPTIONS Diagnostics Remote digital loop and remote digital loop self test. Analog loop and analog loop self test Digital loop test Power-on self test. Auto retrain. ASYNCHRONOUS DATA FORMAT 1 start bit 7 data bits even or odd parity 1 stop bit 1 start bit 7 data bits no parity 2 stop bits 1 start bit 7 data bits mark or space parity 1 stop bit 1 start bit 8 data bits no parity 1 stop bit DIALING CAPABILITY:............Touch-Tone and rotary-dial pulse dialing. COMMAND BUFFER:...........................................40 characters. OPERATION:..........................................Full-or half-duplex. DATA RATE:.................................Up to 300, 1200, 0r 2400 bps. INTERFACE:......................................................RS-232-C DATA MODE:....................Compatible with Bell System 103 or 300 bps Compatibility asynchronous modems Bell 212A 1200 bps asynchronous modems CCITT Recommendation V.22 1200 bps asynchronous modems. CCITT v.22 bis 2400 bps asynchronous modems. RECEIVE SENSITIVITY:............................................-43dBm. TRANSMIT LEVEL:.................................................-12dBm. REGISTRATION:......................FCC-registered for direct connection to the nationwide telephone system. Connects with the following modular jacks: RJ11C SCRAMBLE POLYNOMIAL:..................................X=1 + X-14 x X-17 TEST AND DIAGNOSTICS FACILITIES:..............Local Analog Loopback L3. Local Analog Loopback L3 with Self-Test. Local Digital Loopback. Remote Digital Loopback L2. Remote Digital Loopback L2 with Self-Test Programmable test-timer. RESPONSES SUPPORTED: DTMF TONE SYMBOLS: OK 0 1 CONNECT 1 2 RING 2 3 NO CARRIER 3 4 ERROR 4 5 CONNECT 1200 5 6 NO DIALTONE 6 7 BUSY 7 8 NO ANSEWR 8 9 CONNECT 2400 10 # 0 * A B C D TRANSMITTER SIGNALING FREQUENCIES: V.22 bis low-channel originate mode 1200 +/- .01% V.22 low-channel originate mode 1200 +/- .01% V.22 bis high-channel answer mode 2400 +/- .01% V.22 high-channel answer mode 2400 +/- .01% Bell 212A high-channel answer mode 2400 +/- .01% Bell 212A low-channel originate mode 1200 +/- .01% Bell 103 originate mark 1270 +/- .01% Bell 103 originate space 1070 +/- .01% Bell 103 answer mark 2225 +/- .01% Bell 103 answer space 2025 +/- .01% (SMC/all-06/06/94)