WP-101  (260-3970)            Print Wheel              Faxback Doc. # 5961

To Remove:
1. Remove the ribbon cassette.
2. Pull the print wheel set/release lever toward you. The print wheel pops
   off.
3. Lightly grasp the top of the print wheel and carefully pull it up.

To Install:
1. Lightly grasp the edge of the print wheel. Carefully lower it in between
   the card holder and the print head.
NOTE: Be sure that the typeface side faces the card holder.
2. Gently push the print wheel set/release lever toward the back of the WP-
   101 until you hear a click. Continue pressing the lever until you hear a
   second click. The print wheel is now locked into place.
3. Replace the ribbon cassette.
4. To set the print wheel characters to their proper positions, press CODE +
   W (WHEEL). You will hear a beep.

The next time you tell the WP-101 to print, the print wheel spins rapidly and
sets itself to its correct position. Then, printing begins.

NOTE: Reinstall the print wheel if there are any abnormal sounds or if
incorrect characters are printed.

(css/jej-05/11/94)