CM-11 (25-1024/A/C) Setup Faxback Doc. # 6014 Follow these steps to connect the monitor to your computer and to power. 1. Be sure that power to all components is off. 2. Connect the monitor's signal connector to the CPU of a compatible com- puter. 3. Plug the power cord into a standard, grounded AC outlet or approved power strip. 4. Before you turn on the monitor, check your computer's owner's manual for any instructions about turning on equipment connected to the computer. 5. Turn on the monitor. NOTE: If horizontal lines appear on the screen, turn off the computer, be sure the signal connector is firmly connected, and turn on the computer. Setup Hints: * Do not obstruct the ventilation opening. * Install the monitor at least 4" away from the wall. * Place the monitor on a flat, stable surface. * Never block the openings on the bottom of the monitor by placing it on a bed, sofa, rug, or other soft surface. * Place the monitor in a built-in enclosure only if proper ventilation is provided. * Never place the monitor near or over a radiator or heat register. * Keep the monitor dry and free of excess dust. Moisture and dust can damage the monitor.