VGM-150  (25-4090)          Using Procomm Plus 2.0     Faxback Doc. # 6083

Follow these steps to set up your system to run Procomm Plus in the full-
page mode:

1. Type: fp off <ENTER> to be sure FP.EXE is not active.
2. Install Procomm Plus for color operation per the instruction manual by
   answering yes to the installation question, Does the copyright box above
   have a blue background?
3. After completing the Procomm Plus installation, verify that it is work-
   ing properly.
4. Type: fp pcplus <ENTER> to place the monitor in a 50-row mode.
5. Activate Procomm Plus.
6. Press: <ALT><S> to activate the Procomm Plus setup utility.
7. Choose Color Option and press <ENTER>.
8. Select the gray shades desired and save the setup options.
9. Procomm Plus is now set up for 50-row, full-page operation.

To use Procomm Plus in the full-page, 50-row mode, type the following:

   fp pcplus    <ENTER>

   pcplus /f"filename"    <ENTER>

You can include these commands in a batch file for easier use. Refer to the
MS-DOS User's Guide for information about making batch files.