Talking Vehicle Alarm  (490-0730)      Preparation      Faxback Doc. # 6130

Selecting a Location

Select a solid, well-grounded metal surface under the vehicle's hood and
behind the grill to mount the alarm (e.g. metal fender, firewall, or metal
plate).  Make sure you can conveniently route the alarm's red power wire
from the alarm to the vehicle's (+) positive battery terminal.

Note:  Keep the yellow antenna wire straight and as far away from metal as
       possible.

Caution:  Do not mount the alarm on the engine or too close to the exhaust
          or other hot areas.

MOUNTING THE ALARM

Use the alarm's base as a template to mark the position for the supplied
self-drilling screws.  Then thread the screws through the alarm's base
and into the mounting surface.

Note:  If the location you select is thick or hard to mount to, you might
       need to drill holes for the supplied self-drilling screws.

Caution:  Be sure not to drill into any existing wiring mechanisms.

(RLR/jlc-02/23/94)