TAD-248  (430-0757)         Memory Dialing              Faxback Doc. # 6145

You can store up to 20 phone numbers in memory.

You dial a stored priority number by pressing a single button.  We
recommend you store the phone numbers for emergency services in the
priority memory locations.

Store frequency-called numbers in the 17 additional memory locations.
When you store each number, you assign the number a two-digit memory
location code, which you later use to dial the number.

We recommend that you keep a record of the numbers you store in memory.
Write the person's or company's name for each stored number next to the
memory location code on the memory directory.

Each memory location can hold up to 15 digits (16 in pulse mode).

Priority Memories

You can store emergency or often-used numbers in the priority memory
locations.  To store a phone number in a priority memory, follow these
steps.

1.  Lift the handset and listed for a dial tone.

Note:  Be sure that TONE/PULSE is set correctly.

2.  Press and hold down STORE.

3.  While holding down STORE, enter the phone number.  Then, press one of
    the priority memory buttons-P1, P2, or P3-to store the number.

Note:  If you make a mistake while entering the number, release STORE and
       start again from step 2.

4.  Release STORE.

5.  Hang up the handset.

To dial a priority number, lift the handset, wait for a dial tone, and
press the desired  memory location button (P1, P2, or P3).

Testing Stored Emergency Numbers:

If you choose to place test calls for stored emergency numbers, follow
these guidelines:

*  Perform such activities in off-peak hours, such as early morning or late
   evening.

*  Remain on the line and briefly explain to the operator the reason for
   the call before hanging up.

Additional Memories

Follow these steps to store up to 17 additional telephone numbers.

1.  Lift the handset and listen for a dial tone.

2.  Press and hold down STORE.  While holding down STORE, enter the phone
    number.  Then press MEMORY and the memory location number (045-20).

3.  Release STORE.  The number is now stored in the memory location.

4.  Repeat Steps 2 and 3 for each number you want to store.

Notes:

*  Memory locations 01, 02, and 03 are reserved for priority numbers P1, P2
   and P3.  We suggest you store regular telephone numbers in memories 04-
   20.  If you store them in memories 01-03, you replace the priority
   number.

*  We recommend you write down the telephone numbers you store in memory on
   the memory directory located under the handset.

To dial an additional memory number, lift the handset and listen for a dial
tone.  The press MEMORY and enter the desired memory location number.

Storing/Chain-Dialing Special Service Numbers

When you store special service numbers (such as alternate long-distance or
bank-by-phone), we recommend you store the service's phone number in one
memory location and store additional information (such as the long-distance
number) in another memory location.

To memory-dial a special service, press MEMORY and the memory location code
for the service's main number.  When the service answers, press MEMORY and
the memory location code for the additional information.

Notes:

*  If you have pulse service, press LDT at the end of the service's main
   number.

*  If the service requires a personal identification number, manually dial
   the number at the appropriate time.  To prevent unauthorized access to
   the special service, we recommend that you not store your personal
   identification number in memory.

(RLR-02-24-94)