Model 129  (160-0829)           Remote Control         Faxback Doc. # 6298

You can use the remote control to record yourself in a scene or playback
your recording from a distance on a TV connected to the Model 129.

You can use the buttons on the remote control to perform the identical
procedures as the buttons on the camcorder.  To use the remote control,
point it at the remote control receiver window on the front of the
camcorder and press the desired button.

Notes:  Use the remote control within the range shown.

        When you zoom using the remote control, if possible, we recommend
        that you use a TV to monitor the picture.

        Set the power switch to CAMERA to use the remote control's REC
        START/STOP and ZOOM T/W  buttons.  Set it to VCR to use PLAY,
        PAUSE/STILL, REWIND, FAST-F, and STOP.

Cautions:  Be careful not to let direct sunlight or bright light from
           interior illumination fall onto the remote control receiver
           window, as this may prevent the remote control from operating
           properly.

           Be sure that there are no obstacles between the remote control
           and the receiver window on the camcorder.

Disabling/Enabling the Remote Control

The Model 129 has a remote control on/off function to help you avoid
activating a function by accidentally pressing the remote control buttons
while you are carrying the camcorder.

To disable the remote control, do the following.

1.  Slide the power switch to CAMERA so the power indicator lights.

2.  Look into the viewfinder and press MENU.  The menu display appears in
    the viewfinder.

3.  Press SELECT so the pointer is next to REMOTE.

4.  Press Set.  ON starts flashing.  Press SELECT to change the display
    to OFF, then press SET to store the setting.

5.  Press MENU.  The viewfinder display returns to normal.

To enable the remote control, repeat above procedure and select ON in
Step 4.

PAUSE REMOTE CONTROL
(OPTIONAL ACCESSORY)

Use the convenient optional 16 ft. (5m) 16-2300 pause remote control for
remote control operation outside the range of the infrared remote
control.  The infrared remote control only works when it is pointed at
the receiver window on the front of the camcorder, but the pause remote
control lets you control the camcorder from all sides.

1.  Remove the terminal cover by sliding it in the direction of the
    arrow. Then plug the pause remote control cable into the REMOTE
    jack.

2.  Slide the power switch to CAMERA.  Check that ||----- appears in the
    viewfinder.

3.  Press REC/PAUSE on the pause remote control to start recording; the
    record indicator lights.  To pause, press the button again.

(BR/all-07/13/94)