North Park Fashion Phone  (430-0831A)   Preparation   Faxback Doc. # 6305

CONNECTING THE HANDSET CORD

Plug one end of the supplied coiled cord into the handset jack on the
left side of the phone's base.  Plug the other end into the jack on the
handset.

Note:  Longer coiled handset cords are available at your local Radio
       Shack store.

CONNECTION TO THE PHONE LINE

Follow these steps to connect the phone to a modular jack.

1.  Plug the supplied phone cord into the jack on the back of the phone.

2.  Plug the other end of the cord into a modular phone jack.

Notes:

  If you do not have a modular phone jack, you can either update the
  wiring yourself or the phone company can update it for you.  Radio
  Shack stores sell the jack and adapters necessary to convert from older
  wiring methods to modular wiring.

  The telephone company will charge you for installation of necessary
  jacks.  The telephone company will ask you for the USOC number of the
  jack to be installed.  This number is RJ11C.

SETTING THE TONE/PULSE SWITCH

Set TONE/PULSE on the back of the phone for the type of service you have.
If you are not sure which setting to use, do this simple test.

1.  Set TONE/PULSE to TONE.

2.  Lift the handset and listen for a dial tone.

3.  Press any number other than 0.

If the dial tone stops, you have touch-tone service.  Leave TONE/PULSE
set to TONE.

If the dial tone continues, you have pulse service.  Set TONE/PULSE
to PULSE.

SETTING THE RINGER SWITCH

The RINGER HI/LO/OFF on the back of the phone lets you set the ringer's
volume to suit your needs.

Set the RINGER HI/LO/OFF to OFF when you do not want the ringer to sound.
You can continue receiving calls on the phone by lifting the handset when
the ringer indicator flashes or other phones ring on the same line.

(LB/smc-05/04/94)