System 208  (430-0616A)             Setup             Faxback Doc. # 6350

ADJUSTING THE LINE STATUS INDICATORS

1.  Lift the handset and press LINE 1.

2.  Place the call.

3.  Place the call on hold by pressing HOLD.

4.  Adjust the LN1 line adjust in the back of the unit using the
    supplied screwdriver (located inside the wall-mount bracket) until
    Line 1's indicator blinks steadily.

5.  Repeat Steps 1-4 using Line 2 and the LN2 adjustment.

If you do not want the Line 2 status indicator to light - for example, if
you are using the System 208 telephone on a single-line system - turn the
LN2 ON/OFF switch to OFF.

NOTE:  After you finish making adjustment, put the screwdriver 
       inside the wall mount bracket, in case you need to re-
       adjust in the future.

TO SET THE DIALING MODE (TONE/PULSE)

1.  Set TONE/PULSE to TONE.

2.  Lift the handset.

3.  Press LINE 1.

4.. Press any number key.  If the dial tone stops, you have touch-tone
    service on that line.  Otherwise, you have pulse (rotary) service.

5.  Repeat Steps 2-4 for Line 2.

6.  If you have pulse service on either line, set TONE/PULSE to PULSE.
    Otherwise, leave it set to TONE.

SETTING THE RINGER SWITCHES

Set the RINGER OFF-LO-HI switches to the desired volume level for each
line.

If you set the switch to OFF, the ringer does not sound.  You can still
use the telephone to make and receive calls if you hear another extension
ringing.

RECORDING YOUR PHONE NUMBERS

Lift the plastic cover from the telephone number plate, using a paper
clip or other pointed object.  Write the telephone numbers for Lines 1
and 2 in the space provided.  Replace the cover.

(CJD/smc-04/21/94)