EC-2026  (650-0829)         Setting The Alarm         Faxback Doc. # 6366

NOTES

If you make an error, press C and enter the desired alarm time.

If you enter an invalid number (65 for minutes, for example), E appears
on the display.  Press C to clear it.

In this example, the alarm time is set to 7:30 AM.

1.  Press ALARM to see the alarm-setting display.

2.  Enter the desired hour, then press HOUR.

3.  Press AM/PM to select AM or PM.

4.  Enter the desired minute, then press MIN

Note:  To set the minutes to 00, simply skip to step 5.

5.  Press ALARM to store the setting.  The alarm is automatically turned
    on.  ALARM SIGNAL appears, and the analog second display shows the
    hour hand of the set alarm time.

Press TIME to return to the clock display.  At the set alarm time, a tone
sounds for about 20 seconds.  Press any key to stop the alarm.

MEMORY CALCULATIONS

M +      Adds the displayed value to memory.

M -      Subtracts the displayed value from memory.

M R C    Recalls the value stored in memory.

NOTES

M appears on the display when a value is stored in memory.

Press MRC twice to clear the value stored in memory.

Memory contents are stored even after the calculator reverts to the
clock display.

(BR/smc-05/11/94)