Travel Alarm Clock  (630-0720A)       Operation        Faxback Doc. # 6447

SETTING THE TIME

1.  Lift the control panel cover on the bottom front of the clock.

2.  Set TIME SET/LOCK/ALARM SET to TIME SET.  The time display (on the
    left) flashes.

3.  Repeatedly press or press and hold up arrow or down arrow to set the
    time forward or backward.

NOTE:  Be sure to set the time to AM or PM correctly.  AM or PM appears
       to the left of the time.

4.  Set TIME SET/LOCK/ALARM SET to LOCK.  The time stop flashing.

SETTING THE ALARM TIME

1.  Set TIME SET/LOCK/ALARM SET to ALARM SET.  The alarm time display
    (on the right) flashes.

2.  Press and hold up arrow or down arrow to set the alarm time forward
    or backward.

NOTE:  Be sure to set the time to AM or PM correctly.  AM or PM  appears
       to the left of the time.

3.  Set TIME SET/LOCK/ALARM SET to LOCK.  The alarm stops flashing.

USING THE ALARM

Set OFF/ALARM/ON to ON to turn on the alarm.  (((*))) appears on the
display.  

At the alarm time, the alarm sounds a series of beeps which increase in
volume.  After 1 minute, the alarm automatically turns off.  To silence
the alarm before 1 minute elapses, set OFF/ALARM/ON to OFF.

USING SNOOZE

Press LIGHT/SNOOZE on the upper right corner of the display to silence
the alarm for about 5 minutes.  You can keep pressing for up to one hour,
then the alarm automatically turns off.  The alarm sounds again at the
preset time the next day.

USING THE LIGHT

Press LIGHT/SNOOZE on the upper right corner of the display.  The display
lights for about 3 seconds, then automatically turns off.

USING THE STAND

To use the control panel cover a stand, pull the cover over the back of
the clock until it snaps into place.

(CJD/all-07/14/94)