ET-496  (430-1001)           Specifications           Faxback Doc. # 6505

OPERATING FREQUENCIES

                     Base                            Handset        
CHANNEL      TX              RX                TX            RX     
  F       46.610 MHz     49.670 MHz        49.670 MHz     46.610 MHz
  I       46.710 MHz     49.770 MHz        49.770 MHz     46.710 MHz
  M       46.870 MHz     49.930 MHz        49.930 MHz     46.870 MHz
  N       46.930 MHz     49.990 MHz        49.990 MHz     46.930 MHz
  O       46.970 MHz     49.970 MHz        49.970 MHz     46.970 MHz

GENERAL

Transmit RF Output:.........................................9800 mircoV/m
Pulse Mode Dialing Rate:...........................................10 pps
Pause Entry Delay:..............................................4 seconds
Interdigital Pause:...........................................850 milli S
Radial Memory Capacity:.........................................63 Digits

Power Requirements
      Base:..................................................120 Volts AC
      Handset:......................2.4 Volts DC (Nickel-Cadmium Battery)
Weight:.............................................................19 oz
Measurement
      Base:...............................8 9/16 x 3 13/16 x 2 1/8 Inches
      Handset:............................7 15/16 x 2 5/16 x 2 1/8 Inches

OPERATING PARAMETERS

We supply this information to help you answer questions your phone
company might ask.

Interface:.....................................................Loop Start
Connector:.......................................USOC Type RJ11C or RJ11W
Ringer:...........................................Standard Bridged Ringer
                        20-60 Hz or Square Wave, 40-130 Volts Ring Signal
                                                                         
Resistance:........................100M Ohm (On Hook), 300 Ohm (Off Hook)

(CJD/smc-05/10/94)