Wireless Home Control  (610-2610)     Features         Faxback Doc. # 6542

You can install your Radio Shack Wireless Home Security System with
Emergency Phone Dialer anywhere using your existing house wiring.
The system operates using radio frequencies, thus eliminating the
need for additional wiring.  It includes a handheld remote, one
keychain remote, two door/window sensors, a motion detector, and a
lamp module so you can immediately begin using your system.  With
separately purchased remote sensors installed, the console can
monitor up to 16 security zones and sound its built-in alarm when a
violation occurs in any zone.

Here are some additional features of your kit.

          2 Door/Window Sensors - Trigger the console's built-in alarm
                                  when a secured door or window opens
                                  (additional sensors, Cat. No.61-2612).

                Handheld Remote - Allows you to arm and disarm the system
                                  and control the lights and appliances
                                  connected to plug 'n power modules
                                  (additional handheld remotes, Cat. No.
                                  61-2560).

                Keychain Remote - Lets you conveniently arm and disarm
                                  the system as you come and go and turn
                                  on/off lights and appliances (additional
                                  keychain remotes, Cat. No. 61-2618). 

                    Lamp Module - Allows you to turn on/off a lamp using a
                                  remote control.  The lamp also flashes
                                  on and off during an alarm (additional
                                  lamp modules, Cat. No. 61-2682).

                Motion Detector - Protects an area where an intruder might
                                  enter through more than one door or
                                  window (additional motion detector,
                                  Cat. No. 61-2614).

Plug n' power Compatible Design - Lets you add a total of 16
                                  door/window sensors, lamp modules,
                                  motion detectors, and other
                                  accessories to customize your
                                  home security system.

          Supervised Operation - Keeps track of each door/window
                                 sensor's status and alerts you if
                                 there is a problem (such as an
                                 intrusion or a low battery).

         Built-In Voice Dialer - Dials a friend or neighbor for help
                                 and plays back your recorded
                                 message.

Please read this entire manual carefully so you understand how to
correctly install and use this security system.

Note:  The suitability of this kit to perform as a burglar alarm or
       as an emergency service device has not been evaluated by
       Underwriters' Laboratories, Inc.

(LB/all-07/11/94)