7-Band Car Equalizer  (120-1973)     Operation          Faxback Doc. # 6628

TURNING THE EQUALIZER ON AND OFF

Follow these steps to turn on the equalizer.

1.  Set the radio/cassette player's volume to a low level.

2.  Turn on the vehicle's ignition and the radio/cassette player.

3.  Press the equalizer's POWER button so the POWER indicator lights.

4.  Adjust the radio/cassette player's volume.

To turn off the equalizer, press POWER so the POWER indicator turns off.
When the equalizer is off, no output comes out of the equalizer.

USING THE FADER CONTROL

Use the FADER control to adjust the balance between front and rear
speakers.

Rotating FADER to F (Front) decreases the sound level of the rear
speakers:  rotating FADER to R (Rear) decreases the sound level of the
front speakers.

ADJUSTING THE SOUND

Set the radio/cassette player's treble and bass controls (or tone control)
to the center position.  Then adjust the equalizer's slide controls for
the desired sound.

Each slide control affects a range of frequencies.  The midpoint of each
control's frequency range is indented.

To boost a frequency range's level, slide the control above the midpoint
(O dB) toward + 12 dB) toward -12dB.  To leave a frequency range's level
unchanged (flat response), set the control to the midpoint (O dB).

BYPASSING THE EQUALIZER

Press BYPASS in to bypass the equalizer's circuit so you can hear the
sound without change (flat response).  To hear the equalized sound, press
BYPASS again to release the button.

(BR/all-6/28/84)