Dustbot  (600-2556)              Operation             Faxback Doc. # 6643

To turn on the Dustbot, slide the power switch on the Dustbot to ON.

As the Dustbot moves forward, he sweeps with the broom and vacuums dust
while his eyes flash.  When the Dustbot reaches the edge of the table or
desk, he automatically turns to the right and keeps going as soon as the
path is clear.

Cautions:  If the Dustbot runs almost parallel to an edge, he might fall
           off.

           The Dustbot is designed for dry vacuuming only.  Do not try
           to vacuum liquids.  Also, avoid vacuuming hair, string, or
           anything else that might jam the Dustbot's mechanism.

Notes:  The Dustbot runs best on smooth surfaces.  Do not use the
        Dustbot on carpet.

        If the Dustbot does not operate properly, remove and reinsert
        the batteries, making sure they touch the battery contacts.

CLEARING THE DUST COLLECTOR

Empty the Dustbot's dust collector after every use for the best
performance.

1.  Move the compartment door on the bottom of the Dustbot in the
    direction marked OPEN and lift it open.

2.  Hold the Dustbot right side up and shake out dust particles.  Use the
    Dustbot's broom to brush out any remaining particles.

(LB/all-08/18/94)