50 Watt Trunk Amp  (120-1970)   Connecting Power        Faxback Doc. # 6646

CONNECTING POWER

Follow these steps to connect power to the amplifier.

1.  Disconnect the positive (+) wire from your vehicle's battery.  This
    reduces the possibility of damage to your system during installation.

     Note:  You must reset the clock, the radio's digital tuner memories,
            and other timer/memory devices when you reconnect the battery
            wire after wiring is complete.

2.  Connect the amplifier's black (ground) wire to a nearby part of the
    vehicle's metal frame.

    Note:  Many modern vehicle parts are made of plastic or other
           materials that do not conduct electricity.  You must connect
           the black (ground) wire to a metal part that is not insulated
           from the vehicle frame by one of these non-conducting parts.

3.  Connect the red (power) wire directly to the car battery's + 12-volt
    power source.

CONNECTING THE SWITCHED POWER LEAD

Follow these steps to connect the switched power lead.

1.  Connect the supplied orange wire's male quick disconnect plug to your
    car stereo system's switched power output lead.

2.  Connect the orange wire's other end to the amplifier's REM (Remote)
    terminal.  With this connection, the amplifier turns on/off when you
    turn on/off your car stereo system.

(LB/all-06/28/94)