50 Watt Trunk Amp  (120-1970)       Operation           Faxback Doc. # 6648

TURNING ON THE AMPLIFIER

The amplifier automatically turns on whenever you turn on your stereo
system.  The POWER indicator lights when the amplifier
is on.

SETTING THE INPUT LEVEL CONTROL

LEVEL lets you adjust the level of audio signals that enter the amplifier.
For the best performance, follow these steps to adjust the input level.

1.  Turn LEVEL fully counterclockwise.

2.  Turn on your stereo system and turn up the volume to about one-third
    of its full range.  Turn on the ignition, if necessary, to turn on
    the amplifier.

3.  Adjust LEVEL until the volume is at the maximum desired level.

4.  Adjust the stereo system's volume control to a comfortable listening
    level.

Cautions:  Never turn LEVEL up any farther than you need to get clear
           sound at 2/3 volume.

           The sound distorts if any output channel shorts.  Turn off the
           amplifier and try to locate the short.

LISTENING SAFETY

Do not listen at extremely high volume levels.  Extended, high-volume
listening can lead to permanent hearing loss.  To protect your hearing,
follow these guidelines.

*  Always start by setting the volume to the lowest level possible before
   you begin listening then gradually increase the volume as necessary.

*  Once you set the volume, do not increase it.  Over a period of time,
   your ears adapt to the volume level, so a volume level that does not
   cause discomfort might still damage your hearing.

(LB/all-06/28/94)