DMP-207  (260-2917)          Paper Parking             Faxback Doc. # 6685

Paper parking is a convenient feature that allows you to switch quickly 
between continuous-feed paper and the automatic sheet feeder.  It works by 
backing the continuous paper out of the printer to where it is no longer 
touching the platen.  However, the paper remains in the tractor feeders, 
ready to feed into the printer.

To park your continuous paper:

1.  After the current job finishes, tear off the paper after the last
    page.  Press the ON/OFF LINE key to take the printer off line.

2.  Press the LOAD/PARK key to retract the paper to the park position.
    The printer reverse feeds the paper a maximum of the current page
    length plus 6 inches.

3.  Disengage the tractor unit by moving the tractor lever forward.  You
    can now feed single sheets into the printer with the automatic sheet
    feeder or with manual feeder.

When you are ready to switch back to continuous paper follow these steps:

1.  Eject a single sheet of paper (if one remains inserted) by taking the
    printer off line and pressing the LOAD/PARK key.

2.  Move the tractor lever rearward to engage the tractor unit.

3.  Press the LOAD/PARK key.  The tractor loads the paper and advances it
    to the top-of-form position.

(LG/all-06/28/94)