Wired Intercom  (430-0223A)        Operation           Faxback Doc. # 6706

Signalling From the Master Station

1.  Leave the OFF/VOLUME control in the OFF position.

2.  Choose the remote station you want to signal by setting the REMOTE
    switch to that station's number.  Press [PUSH TO TALK] to signal
    that station.

NOTE:  You can signal all three remote stations at once by pressing [PUSH
       TO TALK] while the REMOTE switch is set to HOLD.

Talking From the Master Station

1.  Turn the master station's OFF/VOLUME control clockwise until it clicks
    on.

2.  Set the REMOTE switch to the appropriate number to talk to one remote
    station, or set it to HOLD to talk to all three stations.

3.  Press and hold [PRESS TO TALK] and speak into the master station's
    grille.

4.  To listen, release [PUSH TO TALK].  You can adjust the OFF/VOLUME
    control as necessary to hear.

Signalling From a Remote Station

On a remote station, press [CALL] to signal the master station.

NOTE:  A call signal from a remote station can be heard at the master
       station only if the master station's OFF/VOLUME control is set to
       OFF and the REMOTE switch is set to HOLD or to the number of the
       calling station.

Talking From a Remote Station

Speak into the remote station's grille.  Then, listen for the reply from
the master station.

NOTES:  To talk, the master station's OFF/VOLUME control must be set on
        and the REMOTE switch set to the calling station's number or to
        HOLD.

        The remote station's [CALL] button is only for signalling.  Do not
        press this button while talking to or listening to the master
        station.

(CJD/all-8/17/94)