2 X 50 Watt Truck Amp  (120-1971)     Preparation      Faxback Doc. # 6713

Before you install the amplifier, carefully read all instructions.  If you
are unsure about any part of the installation process, we recommend that
you have a professional install your amplifier.

Note the following before you begin installing the amplifier:

  Be sure your vehicle has a 12-volt DC, negative-ground electrical
  system.  If it does not, you cannot use this amplifier.

  Before you mount the amplifier, temporarily connect the amplifier
  and test it to be sure it works.  Do not permanently mount the
  amplifier until you are sure the connections are correct.


CHOOSING A MOUNTING LOCATION

Choose a mounting location that meets the following requirements:

  Does not interfere with the vehicle's operation

  Lets you drill mounting holes without damaging other vehicle
  components

  Allows enough space around the cooling fins to permit reasonable
  airflow and cooling


INCLUDED WITH THE AMPLIFIER

The amplifier comes with the following items that are necessary for
mounting.  Be sure to unpack these items before you dispose of the packing
materials.

  4 Sheet-Metal Screws

  4 Spring Washers

  4 Flat Washers


(CJD/all-07/11/94)