Four-In-One Remote Control  (150-1909)    Operation     Faxback Doc. # 6724

To use the 4-in-1, do the following:

1.  Press the device key for the device you want to control.

2.  Point the 4-in-1 toward the device and press POWER to turn on the
    device.

3.  Repeat Steps 1 and 2 for other devices.

4.  Point the 4-in-1 toward the device you want to control and press the
    desired command keys.

    The command keys on the 4-in-1 work the same as the keys on the
    device's original remote control; however, the labeling might differ
    slightly.

5.  To turn off the last device you selected, press POWER.  To turn off
    other devices, press the device selection key for the device you want
    to turn off, and then press POWER.

PUNCH THROUGH

The punch through feature lets you alternately control two different
devices without pressing the device keys for each one.  Here's how it
works.

All of the 4-in-1's keys are not used by any one device.  For example, a
TV is often the only device that uses VOLUME keys, and a VCR is usually
the only device that uses keys such as REWIND, FAST F, and so on.

When you press TV and then press VCR, the functions of any keys not used
by the VCR retain their TV functions.

If your cable box or VCR has volume control in it you can turn off the
punch through feature.  This allows your cable box or VCR to control the
volume of your TV set provided it already can do so.  If you want to
control volume through your cable box, you must be in the cable mode.  If
you want to control the volume through your VCR, you must be in the VCR
mode.  For example:

When the remote is in the cable mode, you would press:

              PROG - 9 - 9 - 9 - CABLE - Volume Up

When the indicator blinks three times, the volume will be controlled
through your cable box.  To turn on the punch through feature, repeat the
procedure.

To turn off the punch through feature for your VCR press:

              PROG - 9 - 9 - 9 - VCR - Volume Up

When the indicator blinks three times, the volume will be controlled
through your VCR.  To turn on the punch through feature, repeat the
procedure.

The punch through feature does not work if the last two devices you select
have the same (or similar) features.  For example, most TVs and VCRs have
CHANNEL keys on their remote controls.  In this case, you would have to
press the desired device key before you use the 4-in-1's CHANNEL keys.

(br/all-6/29/94)