SelectaCom  (430-0219)          Installation           Faxback Doc. # 6850

You can install the SELECTaCOM stations almost anywhere there is a
standard AC outlet.  You can either mount the stations on the wall, or
place them on a desktop or table.  Then, simply plug them in and you're
ready to communicate.

Stations can transmit up to 300 feet and between buildings, as long as
they are connected to the same power line transformer.  Most residential
and many commercial properties meet this requirement.

Note:  Placing the stations too close together produces feedback and
       creates a squealing sound.

To mount a station on the wall, you need two screws (not included).  The
screws must have heads that fit into the key-hole slots on the station's
back.  Follow these steps to mount a station on the wall.

1.  Mark the wall to indicate the correct distance between the two screws
    (2 3/4 inch).

2.  Drill holes for inserting the screws.

3.  Thread the screws into the wall until the heads extend about 1/8 inch.

4.  Hang the station on the screws.

Note:  Do not attach the power cords to walls, floors, or ceilings.

(br/all-7/6/94)