STA-7500 (310-2107) Specifications Faxback Doc. # 6911 Unit Nominal Limit Tuning coverage for USA / Canada:..........MHz........87.5-107.9 Tuning coverage for Europe:................MHz........87.50-108.00 Usable sensitivity at noise and distortion: dBf........17.2...........20.7 3% 75 ohm input: Image rejection at 106 MHz:................dB.........43...............38 If rejection at 90 MHz:....................dB.........80...............70 Full limiting at -3 dB:....................microV.....1.5..............26 50 dB quieting sensitivity:....MONO........microV.....5.................7 at 98 MHz: STEREO......microV.....70...............80 Distortion at 1 mV input:......MONO........%..........0.35............0.5 STEREO......%..........0.5.............0.7 Signal to noise (S/N) ratio:...MONO........dB.........70...............65 at 1 mV input: STEREO......dB.........65...............60 De-emphasis at 100-10,000 Hz:..............dB.........+/-1.5.........+/-2 AM rejection ratio at 100 microV input:....dB.........45...............35 Search level at 98 MHz:....................microV.....6............3.5-10 Output voltage at 75 kHz dev:..MONO........V..........0.5......0.5+/-0.15 (1 kHz mod., 1 mV input):...STEREO......V..........0.45....0.45+/-0.15 Muting threshold at 98 MHz:...............microV......6............3.5-10 Overload THD at 98 MHZ, 100% mod: at 100 mV RF input:......................%..........0.4.............0.6 Spurious response at 98 MHz:...............dB.........60...............50 (antenna input 3 microV): Capture ratio at 1 mV input:..............dB.........2.5................3 Alternate channel selectivity at:..........dB.........48...............45 at 0.1 mV input: Unit Nominal Limit Stereo separation:........100 Hz...........dB.........33...............28 at 100% mod., 1 mV input: 1 kHz..........dB.........43...............33 10 kHz..........dB.........30...............25 DISTORTION at 100% mod., 1 mV input:...MONO.........%..........0.35............0.5 through IHF filter: STEREO.......%..........0.5.............0.7 Automatic stereo threshold:................microV.....6............3.5-10 Residual 19 kHz and 38 kHz:................dB.........35...............27 at 1 mV input: Unit Nominal Limit Tuning coverage for USA/Canada:............kHz........520-1710 Tuning coverage for Europe:................kHz........522-1611 Usable sensitivity 600 kHz, 1010 kHz, 1400 kHz: (603 kHz, 1008 kHz, 1404 kHz for Europe): at 400 Hz, 30% mod., S/N=-20 dB:.........microV/m...350.............700 Image rejection at 1400 kHz:...............dB.........35...............28 (1400 kHz for Europe) If rejection at 600 kHz:...................dB.........54...............48 (603 kHz for Europe) AGC figure of merit from 100 mV/m:.........dB.........45...............35 at 1010 kHz: (1008 kHz for Europe): Distortion at 400 Hz, 30% mod:.............%..........0.8.............2.0 5 mV/m input: If bandwidth at 6 dB down: 350.............kHz........8..............5-12 microV/m input: Output voltage at 400 Hz:..................mV.........165........165+/-40 30% mod., 5 mV/m input: Audio response at 4 mV/m input 1 kHz 0 dB: 1010 kHZ (1008 kHz for Europe):.........Hz.........50-2 k.....70-1.8 k - 6 dB Selectivity at 10 kHz 350 microV/m input:..dB.........25...............20 Signal to noise (S/N) ratio at 1010 kHz: (1008 kHz for Europe) with...............dB.........40...............35 antenna input 5 mV/m: RF overload 400 Hz 80% mod:. 100 mV input.%..........1.3...............3 Search level:..............................microV/m...500......500+/-6 dB Unit Nominal Limit RMS output power: at distortion below 0.5% 40 Hz-20 kHz:...W..........72...............70 both channel driven at 8 ohm: at distortion below 0.5% 1 kHz:..........W..........74...............70 both channels driven at 8 ohm: Intermodulation distortion:..................%..........0.1...........0.3 at 60 W output 60 Hz: 7 kHz=4: 1 SMPTE: Harmonic distortion at 60 W output:.40 Hz.%:..........0.01............0.1 1 kHz..%:.........0.01............0.1 20 kHz..%:.........0.05............0.3 FREQUENCY RESPONSE AT AUX 8 ohm load, 1 W output:....40 Hz-20 kHz.dB..........+/-1.........+/-1.5 Input sensitivity for 70 W output: PHONO..mV:.........2.5.......2.5+/-0.4 CD/AUX.mV:.........150........150+/-30 Tone control: Bass, 100 Hz...DB:.........+/-10.....+/-10+/-2 Treble, 10 kHz..DB:.........+/-10.....+/-10+/-2 Phono amp overload at 0.5% THD:...........mV..........140.............120 Loudness compensation at Volume - 30 dB: 100 Hz.dB..........+6...........+6+/-2 10 kHZ.dB..........+4...........+4+/-2 Channel crosstalk with 4.7 kohm shorted: at AUX input:....................1 kHz..dB..........55...............50 10 kHz..dB..........42...............37 Signal to noise ratio input 4.7kohm shorted: with IHF-A PHONO at 10 mV.dB:.........85...............80 CD/AUX,TV/VCR....dB:.........100..............90 GENERAL Power source:.............................................120 V AC, 60 Hz Power consumption:..............................................180 Watts Dimensions (HWD):.......4 11/16 x 16 7/16 x 12 3/16inches (11x42x28.5 cm) Weight:................................................16.53 lbs (7.5 kg) Notes: 1. Nominal specs represent the design specs. All units should be able to approximate these-some will exceed and some may drop slightly below these specs. Limit specs represent the absolute worst condition that still might be considered acceptable: in no case should a unit fail to meet limit specs. 2. This manual is based on the American (A) standard, and provides information on regional circuit modification through the use of alternate schematic diagrams or wiring diagrams, and information on regional component variations through the use of parts lists. Design and specifications subject to change without notice. (SMM/all-06/06/94)