Stereo Cassette  (120-1998)       Operations            Faxback Doc. # 6929
 
UNDERSTANDING THE CONTROLS

When you listen to your stereo, adjust the following controls to suit
your listening preferences.

ON/VOL-To turn on the stereo, turn this knob clockwise until you hear it
click.  Turn the knob further clockwise to adjust the volume.  To turn off
the stereo, turn the knob counterclockwise until you hear it click.

Warning:  To protect your hearing, do not listen at high volume levels.
          Slowly increase the volume to a comfortable listening level.

BAL - Rotate to adjust the balance between the left and right speakers.

BASS - Turn to increase or decrease low sounds.

TREBLE - Turn to increase or decrease high sounds.

SETTING THE CLOCK

1.  Press F/C if necessary until the display shows the clock.

2.  While you press and hold down F/C, repeatedly press TUN/SEEK DOWN
    ARROW until the display shows the correct hour.  To make the hour
    advance quickly, press and hold down TUN/SEEK DOWN ARROW.

3.  Continue holding down F/C and repeatedly press TUN/SEEK UP ARROW
    until the display shows the correct minute.  To make the minute
    advance quickly press and hold down TUN/SEEK UP ARROW.

4.  When the display shows the correct time, release F/C.

USING THE RADIO

1.  Turn ON/Vol clockwise to turn on the stereo.

2.  Press BAND to select between the 2 AM and 3 FM bands.  AM1 or AM2
    appears on the display when an AM band is selected.  FM1, FM2, or FM3
    appears on the display when an FM band is selected.

    When you turn off the stereo, then turn it back on, the radio
    automatically  tunes to the last station and band you selected.

3.  Tune to the desired station in one of the following ways.

Manual Tuning:  Repeatedly press TUN/SEEK UP ARROW or DOWN ARROW to tune
                up or down the selected band.

Seek Tuning:  Press and hold TUN/SEEK UP ARROW or DOWN ARROW for about 1
              second to tune to the next higher or lower station with a
              strong signal.

4.  Adjust ON/VOL, BASS, TREBLE and BAL as desired.

Notes:

*  ST appears on the display when an FM stereo signal is received.

*  To improve reception of a weak FM stereo station, change the sound to
   monaural by pressing M/S.  MO appears on the display.  Press M/S again
   to return to stereo sound.

*  If the stereo does not find a strong station when seeking, the stereo
   searches the band again and stops on weaker stations.

*  To temporarily display the frequency of the station currently playing,
   press F/C.  The display shows the frequency for 5 seconds, then
   returns to the time display.

(smm 03/07/94)