FM Wireless Microphone (320-1221) Receiver Connections  Faxback Doc. # 7048

1.  Be sure that the POWER switch is off and the VOLUME control is set to
    minimum.

2.  Using a shielded audio cable, connect the LINE jack to the line or
    aux-input of your PA amp, tape recorder, mixer, or other input
    component.

If you are using the line-or aux-input of your amp for another source,
connect the MICROPHONE jack to the microphone input of your amplifier.

You can connect both output jacks to amplify and record the microphone
signals at the same time.

(smc-02/24/94)