AM/FM Clock Radio   (120-1601)   Clock Radio Operation   Faxback Doc. #7107

SETTING/VIEWING THE DATE AND TIME

1.  Press SET four times.  The month digits appear on the left side of
    the display.  Repeatedly press or press and hold down MODE to set
    the month.

NOTE:  If the month (day, hour or minute), do not need changed, press SET
       to go to the next step.

2.  Press SET.  The day digits appear on the right side of the display.
    Repeatedly press or press and hold down MODE to set the day.

3.  Press SET.  The hour digits and one of the time formats (A, P, or H)
    appear.  Repeatedly press or press and hold down MODE until the time
    and format desired is reached.

NOTES:  A and P refer to AM and PM and are both 12-hour cycle.  H stands
        for 24-hour time.

        When the time is set for 12-hour cycles, P appears in the middle
        left of the display to indicate PM hours.

        In the 24-hour format, the hour digits are greater than 12 during
        the PM hours.  For example, 1:00 PM shows as 13:00.

4.   Press SET.  The minute digits appear.  Repeatedly press or press and
     hold down MODE to set the minutes.

5.  Press SET to display the time.

6.  Press MODE to start the clock.  The colon in the middle of the display
    flashes.

NOTE:  To set the seconds to 00, press MODE three times and then press
       SET.  If the seconds are greater than 29 when SET is pressed, the
       minute digits advance by one.

Press MODE to return to the time display.

When the time is displayed, press MODE twice to display the date.  After
about 4 seconds, the time display returns.

(smc/all-06/06/94)