AM/FM Stereo Antenna  (150-1832)     Installation      Faxback Doc. # 7189

Connecting the FM Antenna

The stereo has either a 75-ohm F-connector or a 300-ohm twin-lead
connector for the FM antenna.  Follow the instructions appropriate to the
type of connector the stereo has.

Connecting a 75-Ohm FM Antenna

Push the antenna cable's F-connector onto the stereo's FM connector.

Connecting a 300-Ohm FM Antenna

Press the supplied adapter onto the antenna cable.  Then secure the
adapter's leads to the stereo's FM terminals.

Note:  If the stereo has push-type antenna terminals, cut the spade lugs
       off of the transformer and remove about 1/4 inch of insulation
       from each lead.  Then connect each lead to a push terminal.

Connecting the AM Antenna

Connect one of the antenna's AM leads to the stereo's AM antenna terminal.
Connect the other AM lead to the stereo's ground terminal.

Note:  Some AM tuners get better reception if you do not connect the wire
       to the ground terminal.

Connecting Power to the Antenna

Plug the supplied power supply's phono plug into the antenna's power jack.
Then plug the adapter into an AC outlet.

Note:  If your stereo has switched AC outlets that turn on when you turn
       on the stereo, we recommend you plug the antenna's power adapter
       into one of these outlets.

(br/all-7/19/94)