Video Stabilizer  (150-1270)   Preparation for Use     Faxback Doc. # 7253

If you are unsure about your connections, draw a diagram of your system
and take it to your local Radio Shack for advise.

To realize the maximum benefit from your Video Enhancer/Stabilizer, your
TV must be in good working condition with the controls set for a normal
color picture.  The other components of the video system must also be
working properly.  This unit will not compensate for defects in the other
video equipment.

CHANNEL Switch Setting

The Enhancer/Stabilizer converts the audio/video signals from the VCR or
video disc player to normal VHF TV signals, after they are processed.
These converted signals are sent to the TV through the TV VHF connector.

You may choose to view these signals on either channel 3 or 4.  Set the
CHANNEL switch to the channel not used for normal broadcasts in your area.

FADE Switch Setting

The FADE switch must be sent to IN for normal viewing or monitoring of
signals from the source VCR or video disc player.

Control Settings

The beginning setting for all the front-panel control knobs should be
12 o'clock (the pointers straight up).  Remember:  signals will not pass
through the VES unless the power (LOCK control) is on.

The AUDIO LEVEL should be set at maximum (fully clockwise) to begin.

(br/all-7/21/94)