ET-205  (430-0802A)        Mounting the Phone          Faxback Doc. # 7307

Note:  The phone company can charge you for the installation of the
       necessary jacks.  The USOC number of the jacks to be installed
       is RJ11C (RJ11W for a wall jack).

USING THE PHONE

Set RINGER to HI in a noisy room.  Set it to LOW in a quiet room.

Switch to TONE or PULSE to match the type of service you have.  If
you have pulse (rotary) service, you can switch to TONE during a call
to use tone services.

Press HOLD to hang up the handset without disconnecting the call.  To
release a call from hold, lift the handset.

Press FLASH in place of the switchook for special services such as
call waiting.

Press REDIAL to dial the last number dialed (up to 31 tone or 32
pulse digits).

Press switchook to disconnect a call.

Plug the handset cord into the jacks on the handset and base.

Press * or # for special services.

Indicator lights when a call is on hold.  Turns off when you lift the
handset.

(all-8/8/94)