PRO-41  (200-0301)        Troubleshooting               Faxback Doc. # 7310

BEFORE YOU CALL FOR HELP

The frequencies stored in the PRO-41 memory can be held for approximately
30 minutes without AA batteries or adapter power.  Check memory contents
after replacing batteries.

If you have problems...

We hope you don't - but here are some suggestions.

              TROUBLE                              CHECK

Unit does not turn on/no power.       1.  Batteries are not correctly
                                          installed - check to be sure the
                                          + and - terminals are properly
                                          aligned.

                                      2.  Batteries are dead - replace
                                          with new ones.

No reception/poor reception.          1.  Antenna is not correctly
                                          installed - check connector.

                                      2.  Environment is not suitable for
                                          scanner - relocate unit and try
                                          again.

                                      3.  Frequencies are not properly
                                          programmed - check and
                                          reprogram.

                                      4.  Batteries are weak or dead -
                                          replace with new ones.

E appears in display.                 1.  Programming error - check
                                          frequency and try again.

Beep tone sounds every                1.  Batteries are low -
15-30 seconds.                            replace with new ones.

Keypad does not work/                 1.  Keypad is locked - check and
cannot program.                            set the LOCK switch to OUT.

If none of these suggested remedies solves the problem, return the scanner
to your nearby Radio Shack store for assistance.

(br-7/15/94)