FM Amplified Antenna  (150-1833)     Installation      Faxback Doc. # 7385

CONNECT THE ANTENNA TO YOUR RECEIVER

1.  Attach the appropriate antenna cable connector (either the 75-ohm
    twin-lead output) to your receiver/tuner's antenna terminal (usually
    located on the back of the receiver/tuner).

NOTE:  If the 75-ohm terminal on your receiver/tuner is not an F-type
       connector, use the 300-ohm terminal.

2.  Place the antenna anywhere that is convenient to the receiver/tuner. 
    The higher you place it, the better its reception.  The antenna's
    compact design allows it to fit neatly on a shelf or any flat surface.

Connecting the Antenna to Power

Connect the supplied AC adapter's plug to the antenna's 4.5V DC jack, and 
then plug the adapter into a standard AC outlet.

CAUTION:  Use only the AC adapter supplied with the antenna.  It is
          designed especially for the antenna.  Do not use the adapter to
          power any other device.

(CJD/all-8/3/94)