FM Amplified Antenna  (150-1833)   Operation           Faxback Doc. # 7386

1.  Set POWER to ON.  The red power indicator lights.

2.  Turn on your receiver/tuner and select a station.

3.  Set TUNING on the antenna to the same frequency as your
    receiver/tuner, and use TUNING to fine-tune the station so your
    receiver/tuner signal-strength meter reads maximum.

4.  Set GAIN to LO if you are located near the selected FM station; this
    prevents overload.  Set Gain to HI to increase a weak signal.

5.  To turn off the antenna, set POWER to OFF.

CAUTION:  Do not tamper with the recessed controls on the back of the
          antenna.  They should be adjusted only by a service technician.

(CJD/all-8/3/94)