GALACTIC MULTIMAC  (600-2550)        Battery           Faxback Doc. # 7470

INSTALLING THE WRENCH CRUISER'S BATTERY

The Wrench Cruiser requires one AA battery (not supplied) in its
controller.  We recommend an alkaline battery, such as Radio Shack Cat.
No. 23-557.

To install the battery:

1.  Press down and slide the controller's battery compartment toward the
    arrow to remove it.

2.  Install the battery as indicated by the polarity symbols (+ and -)
    inside the compartment.

3.  Replace the cover.

Replace the controller's battery with a fresh one if the Wrench Cruiser
moves slowly or not at all.

Cautions:  Use only a fresh battery of the required size and type.

           Never leave a dead or weak battery in the controller.  If you
           do not plan to use the Wrench Cruiser for several days, remove
           the battery.

Dispose of the battery properly; do not bury or burn it.


(LB/all-08/29/94)