System 714  (130-1261)          Connections            Faxback Doc. # 7476

CONNECTING AN EXTERNAL ANTENNA

If you want to listen to FM, attach an optional FM or VHF TV external
antenna (not supplied) to the 300-OHM FM ANTENNA wire terminals on the
back of the system.

If you have an outside VHF TV antenna, you can use a simple 300-ohm signal
splitter to connect your radio and TV set to the same antenna. Your local
Radio Shack has a wide selection of antennas and splitters.

CONNECTING THE TUNER/CD TO THE AMPLIFIER/CASSETTE DECK

Use the supplied two-wire audio cord and the 15-wire connector ribbon to
connect the tuner/CD to the amplifer/cassette deck.

1.  Connect the red phono plug at one end of the 2-wire audio cord to the
    TUNER/CD OUT R (right) jack on the back of the tuner/CD.

2.  Connect the white phono plug to the TUNER/CD OUT L (left) jack on the
    back of the tuner/CD.

3.  Connect the red phono plug at the other end of the TUNER/CD OUT R
    (right) jack on the back of the amplifer/cassette deck.

4.  Connect the white phono plug to the TUNER/CD OUT L (left) jack on the
    back of the amplifer/cassette deck.

5.  Connect one end of the 15-wire ribbon's plug to the 15-pin jack on the
    back of the tuner/CD. Be sure the plug's guide ridges match the jack's
    slots on the bottom of the receptacle.

    CAUTION: Forcing the connector cords' plugs into their jacks might
             damage the pins.

6.  Connect the other end of the 15-wire ribbon's plug to the 15-pin jack
    on the back of the amplifier/cassette deck.

CONNECTING THE SPEAKERS

Each speaker has an attached speaker wire which connects to the back of
the amplifier/cassette deck.

1.  Connect the right speaker wire's phono plug to the SPEAKER R terminal.

2.  Connect the left speaker wire's phono plug to the SPEAKER L terminal.

CONNECTING POWER

1.  Plug the female end of the AC power cord to the AC IN socket on the
    back of the amplifier/cassette deck unit.

2.  Plug the other end of the power cord into a standard AC outlet. The
    STAND-BY indicator lights.

CONNECTING HEADPHONES

For private listening, plug headphones with a 1/8 inch plug into the
PHONES jack.

NOTE: Plugging in the headphones automatically disconnects the speakers.

(tlc/all-08/31/94)