System 714  (130-1261)         Remote Control          Faxback Doc. # 7479

Using the remote control, you can control the system's power and volume,
the tuner's automatic scanning, and the CD player's normal play functions.

1.  Press POWER ON/OFF on the amplifier/cassette deck to ON. The STAND-BY
    indicator lights.

2.  Press POWER ON/OFF on the tuner/CD to ON. The STAND-BY indicator
    lights.

3.  Press STAND-BY on the remote control to put the system in the standby
    mode. The system's power turns off but the system responds to remote
    control commands.

    NOTE: To use the remote control, the system must be in the standby
          mode.

4.  To turn on the system, press POWER ON on the remote control. The
    STAND-BY indicator lights.

    NOTE: To turn the system completely off, press POWER on the amplifier/
          cassette deck. The system exits the standby mode and the power
          turns off.

HELPFUL HINTS

*   When using the remote control, make sure the front end of the remote
    control is pointing toward the INFRARED REMOTE sensor on the system.
    the remote control works within a distance of about 18 feet in front
    of the system and within a range of about 15 degrees left and right of
    center.

*   Exposing the remote control to direct sunlight or strong lights such
    as a spotlight will reduce its operating distance or even make it
    inoperative.

(tlc/all-08/31/94)