40 Watt Equalizer/Booster  (120-1955) Specifications   Faxback Doc. # 7550

Maximum Output power...............................20 watts per channel or
                                                 40 watts total (with four
                                            each 8 ohm speakers connected)
Frequency Response...................................15-30,000 Hz, at -3db
Separation...........................................................50 dB

Input Level

    High Impedance..................................................550 mV
    Low Impedance.....................................................2.7V
    CD...............................................................500mV
    Total Harmonic Distortion..............Less than 1% (at 1 watt output)

Equalization Center Frequencies:.................60Hz, 150Hz, 400Hz, 1kHz,
                                                      2.4kHz, 6kHz, 15kHz.
Load Impedance.............4 ohms per channel (8 ohm per speaker terminal)
Current Drain:................................................6.5A Maximum
Power Supply Voltage:............................DC, 14.4V Negative Ground
Dimensions:...............................44mm (H) x 162mm (W) x 128mm (D)
Weight:...............................................................1 Kg

WARNING:  The speakers used with this unit must not only be of high
          quality to maximize the performance of the Booster but must also
          be able to handle at least 20 watts of power.  The high power
          levels produced by the Booster can damage speakers of lower
          power capacity.  In addition, be sure to use only 8 ohm rated
          speakers.  Speakers whose impedance is less than 8 ohms, if
          used, can damage the Booster.

(br/all-9/19/94)