Trunk Mount Amplifier (120-1967)       Operation       Faxback Doc. # 7559

TURNING ON THE AMPLIFIER

The amplifier automatically turns on whenever you turn on your radio/cass-
ette player. POWER lights when the amplifier operates.

SETTING THE LEVEL CONTROL

LEVEL lets you adjust the level of audio signals that enter the amplifier.
To adjust this control for the best performance, follow these steps.

1.  Turn LEVEL fully counterclockwise.

2.  Turn on your stereo system and turn up the volume about one-third of
    its full range. Turn on the ignition, if necessary to turn on the
    amplifier.

3.  Turn LEVEL clockwise until you can hear the program.

4.  Turn turn up the volume on your stereo system until the stereo begins
    to distort. Then, immediately turn down the volume to the point where
    distortion began.

5.  Adjust LEVEL until the volume is at the maximum level you want the ra-
    dio/tape player to produce.

6.  Adjust the stereo system's volume control to reduce the volume to a
    comfortable listening level.

CAUTIONS:  Never turn LEVEL up any farther than you need to get clear
           sound at 2/3 volume.

           When the amplifier's internal temperature reaches 202 degrees
           Fahrenheit, the Automatic Thermal Protection System lowers the
           amplifier's output power until it cools down.

           The sound distorts if any output channel shorts. Turn off the
           amplifier and try to locate the short.

(tlc/all-09/15/94)