40 Watt Equalizer/Booster  (120-1955)     Operation    Faxback Doc. # 7577

TURNING ON THE EQUALIZER/BOOSTER

First, turn on your radio or tape player and set volume to a low level.
Press the POWER button in to turn on the Equalizer/Booster.  The indicator
LED will light up and the sound level from the speakers will increase
significantly.  Re-adjust the volume control on your radio or tape player
for a suitable level.

EQUALIZER SLIDE CONTROL

Make sure the car stereo player tone or Bass and Treble controls are set
to flat or center position.  Slide the seven Equalizer controls up or down
to accent or attenuate each of the designated frequency bands.  This
means you can adjust the sound precisely to match your vehicle's
acoustics.  Setting a control in the center detente position (O) provides
a "flat" response for that particular tonal range.  When the Booster's
POWER button is pressed out, the Equalizer controls have no effect on the
sound.

FADER CONTROL

Turning the FADER knob counter-clockwise brings up the level of the front
speakers and lowers the level of the rear speakers.  Turning the FADER
knob clockwise has the opposite effect.

CD INPUT

Use an extension cable with 1/8" stereo mini phone plugs at both ends.
Plug one end into the head phone jack of the portable CD player and the
other end of the cable into the CD input jack on the front panel of the
Equalizer/Booster.  In this case, the radio/cassette signal will be
terminated and only the CD signal feeds into the Equalizer/Booster.  Turn
on the portable CD player and adjust the volume control of the portable CD
for your listening preference.  If you want to return to radio/cassette,
just unplug the mini phone plug from the front panel.

(br/all-9/19/94)