Casio CMD30B-1A (630-5228) Program Codes Faxback Doc. # 7768 In case anybody asks, the code for the casio remote control watch that will run our radio shack televisions is 17. (trial and error figured it out.) The procedure for determining a code that is not in the OM is as follows: 1. Turn on the TV you are trying to operate and aim the watch's IR transmitter toward the television's IR window (stand as close to the TV as possible). 2. Press and hold set until the display starts blinking (approx. 2 seconds). 3. Press repeatedly and slowly (you will notice the numbers advance every other time the button is depressed. 4. When the television shuts off, quit pressing buttons and look at the display. It will be showing the program code for that TV. 5. Return to normal operation by depressing the set button. The television volume, channels, and power can now be controlled by the watch. VCR's can be programmed in the same way. After completing step 2 above press select to switch to VCR mode, then proceed with remaining steps for the VCR. 3. Press repeatedly and slowly (you will notice the numbers advance every Testing has shown that the watch controles only 3 of the current Radio Shack products. TV 16-255 CODE 29 Works power, channel, and volume. VCR 16-625 CODE 30 Works all tuner and cassette function. VCR 16-532 CODE 16 Works all tuner and cassette functions. One function not mentioned in the owners manuel that makes selecting an unknown code much easyer, is that while in code select mode the power button will increment the code every 2 two times that the power button is presed. This allows the user to scrool threw unknowns and test each one, using one button. Remembered from work at TED: Remember URC programs are out dated before the product hits the shelf. Most URC codes are more sucessfull on products from 1 to 6 years of age. (/all-12/13/94)