DUOPHONE SYSTEM 209  (430-0617)      Specifications     Faxback Doc. # 8070


Pulse Dialing Rate.................................................10 pps
Make/Break Ratio..................................................40/60 %
Inter-Digit Pause..................................................800 ms
Redial Memory Capacity
Pulse Mode......................................................32 Digits
Tone Mode.......................................................31 Digits
Tone Dialing................................................Standard DTMF
Connector..................................................USOC Type RJ14
Access Pause....................................................2 Seconds
Memory Capacity
Pulse Mode......................................................16 Digits
Tone Mode.......................................................15 Digits
Memory Position.Capacity...................21 Stations (including redial)

Intercom

Reception
RF Frequency
Originate.........................................................390 kHz
Answer............................................................320 kHz
Signal To Noise Ratio......................45 dB at 10 mV Input (handset)
                                           48 dB at 10 mV Input (speaker)
Audio Output at 10mV Input
Speaker.at 1 kHz Dev...............................................-2 dBm
Handset.at 1 kHz Dev..............................................-21 dBm

Transmission
RF Frequency
Originate.........................................................320 kHz
Answer............................................................390 kHz
RF Output Voltage.Across 135 Ohm..................................-21 dBv
Dimensions............................4 1/8 x 7 1/8 x 9 1/16 Inches (HWD)
Weight........................................................2 lbs 3 oz.

Operating Parameters

Interface......................................................Loop Start
Ringer...............Standard Bridged Ringer 20-60 Hz sine or square wave
                                                 40-105 volts ring signal
Current......................................5-12 VDC (off hook) 20-70 mA
Resistance..........................10 Mohm (on hook), 210 Ohm (off hook)


(jlc-08/17/93)
(smm 08/24/93)